Newly Improved G96 Tubular Intake Adapter for LS6 and LS1 Intakes. New design incorporates a 92MM throttle body and a mandrel bent tubular elbow for increased flow and performance over the previous design! This is used on all LS swaps using an LS1 or LS6 intake and a Porsche G96 Transaxle. Comes W/ hardware and Finished in a satin black wrinkle powdercoat.

It is HIGHLY recommended that you purchase the 92MM throttle body offered with this elbow. Off the shelf throttle bodies do not have the correct pulley ratio and will not achieve full throttle. All throttle bodies sold by LSDeloreanStore come with a modified pulley, shaft seal, AND tacked blade screws. Option for IAC passage porting is available to quiet down the TB's sucking noise at IAC Postions above 35%

TPS and IAC not included - It is heavily recommended that you use new or used OEM sensors. 

For those wanting to save money, LSDeloreanStore does offer a TB pulley send & return machining service on all generic import TBs, Holley EFI, and WARR TBs. See product page for details.

Unless specifically requested, 102mm throttle bodies are not recommended for displacements under 6.2L and are not stocked by LSDeloreanStore. You will not gain HP over a 92mm TB and will have a very sudden tip in off idle - which hampers low speed driveability. If you are dead set on a 102mm TB leave a note during checkout or send an email with your order number. Lead time will increase up to 2-3 weeks for shipment